龙彩国际|彩票

                                  Loading...
                                  Contact Us
                                  Hammond & Company Ltd
                                  Finway Road
                                  Hemel Hempstead
                                  Hertfordshire
                                  HP2 7PT
                                  England
                                  +44 (0)1442 212 211
                                  +44 (0)1442 252 003
                                  Send a Message
                                  We'll respond within 48 business hours
                                  Gundrill Diagram

                                  Before drilling commences the gun drill must be suported by a guide bush or pre-drilled start hole. Coolant is delivered directly to the cutting edges through the hollow shank and the chips are evacuated back along the V configuration of the tip and shank.

                                  The periphery of the cutting tip is contoured in such a way as to provide both support pads and lubrication galleries. The forces generated by the single sided cutting action act directly on the support pads creating a burnished surface finish and size control down to IT7 tolerances.

                                  Gun drill tips can be manufactured with a step that has either a cutting, or non cutting pilot. Coated tips are also available upon request. These may have a TiN (Titanium Nitride) coating, or a TiAlN (Titanium Aluminium Nitride) coating.

                                  A regrinding service is available at our Hemel Hempstead factory for gun drills, Ventec drills and Speedfeed drills.
                                  Hardened steel guide bushes and whip guides are available for purchase. See accessories.
                                  Driver Design Ref d h h1
                                  View PDF
                                  HAMMOND STANDARD
                                  Diagram
                                  CA 16 40  
                                  CB 25 50  
                                  CC 35 60  
                                  AMERICAN STANDARD
                                  Diagram
                                  Diagram
                                  AA 1/2" 38 26
                                  DM 3/4" 70 46
                                         
                                         
                                         
                                  AC 1.00" 70 55
                                  AD 1.25" 70 55
                                  AE 1.50" 70 55
                                  EUROPEAN STANDARD
                                  Diagram
                                  AF 10 40 24
                                  AK 16 45 31
                                  AG 20 70 34
                                  AH 25 70 34
                                  AJ
                                  32
                                  70
                                  34
                                   
                                  Driver Design Ref d h h1
                                  Diagram AN 16 50 47
                                  WELDON
                                  Diagram
                                    BF 16 48 24
                                  h2 BG 20 50 25
                                  17 BH 25 56 32
                                  19 BJ 32 60 36
                                  19
                                  BK 40 70 40
                                  Diagram DG 10 60 M6X0.5
                                  DH 16 80 M10X1.0
                                  DK 25 100 M16X1.5
                                  DL 36 120 M25X1.5

                                  Ordering Information


                                  When ordering Gun Drills please state diameter, overall length, driver design and, where possible, the material to be cut. There are numerous cutting geometries available for the Gun Drills carbide tip.
                                  Alternatively, go towards the end of this website and order by Product Codes.


                                  Cutting Head Contours



                                     
                                  View PDF
                                     

                                  Tubular Shank Dimensions


                                  Hammond gun drill shanks are manufactured from high quality chrome molybdenum steel and are designed to achieve maximum coolant flow, chip clearance and torsional rigidity.

                                  ? Range ? Tube ? D Range ? Tube ? D Range ? Tube
                                  3,00-3,14 2,8 6,50-6,99 6,2 13,90-14,89 13,4
                                  3,15-3,39 2,95 7,00-7,29 6,7 14,90-15,89 14,4
                                  3,40-3,64 3,2 7,30-7,59 7,0 15,90-16,89 15,3
                                  3,65-3,87 3,45 7,60-7,94 7,3 16,90-17,89 16,2
                                  3,88-3,99 3,65 7,95-8,34 7,6 17,90-18,89 17,2
                                  4,00-4,19 3,8 8,35-8,54 8,0 18,90-19,89 18,2
                                  4,20-4,44 4,0 8,55-8,94 8,2 19,90-20,89 19,2
                                  4,45-4,74 4,25 8,95-9,34 8,6 20,90-21,89 20,2
                                  4,75-4,97 4,55 9,35-9,94 9,0 21,90-22,89 21,2
                                  4,98-5,24 4,75 9,95-10,64 9,6 22,90-23,89 22,2
                                  5,25-5,49 5,0 10,65-10,94 10,3 23,90-24,89 23,2
                                  5,50-5,74 5,25 10,95-11,94 10,6 24,90-26,89 24,2
                                  5,75-5,94 5,5 11,95-12,54 11,6 26,90-28,89 26,2
                                  5,95-6,29 5,7 12,55-12,94 12,2 28,90-30,89 28,2
                                  6,30-6,49 6,0 12,95-13,89 12,6 30,90-33,00 30,2
                                  Updated August 2013

                                  Hammond Recommended Geometry for Various Materials



                                  View PDF
                                  Drill Diameter. Primary Land Chamfer at 20°
                                  ? 3,0 to 12,0 0,4 – 0,6 0,4 – 0,6
                                  ? 12,0 to 25,0 0,6 – 0,8 0,6 – 0,8
                                  ? 25,0 to 32,0 0,8 – 1,2 0,8 – 1,2
                                  Diagram Diagram

                                  Facet Description NG4 Aluminium
                                  (Order code B)
                                  NG13 Grey Cast Iron
                                  (Order code E)
                                  NG80 Flat Bottom
                                  (Order code G)
                                  Horiz. Vertical Horiz. Vertical Horiz. Vertical
                                  A  Outer Primary +15° +15° +40° +12° +1° +12°
                                  B Outer Secondary +14,5° +20° +39,5° +25° +1° +20°
                                  C Inner Relief -20° +15° -20° +12°
                                  D  Front Clearance +25° +35°
                                  E Oil Dub-Off -25° -15° -25° -12° 25° -12°
                                  Point Position D/4 D/4 D/2
                                  Facet Description NG82 Super Alloys
                                  (Order code H)
                                  NG86 Wood Grind
                                  (Order code K)
                                  NG90 Malleable MATL
                                  (Order code L)
                                  Horiz. Vertical Horiz. Vertical Horiz. Vertical
                                  A  Outer Primary +42° +14° +30° +20° +20° +20°
                                  B Outer Secondary +41,5° +25°
                                  C Inner Relief -17° +14° -20° +20° -20° +20°
                                  D  Front Clearance +30° +30° +25°
                                  E Oil Dub-Off -22° -15° -25° -15° -25° -15°
                                  Point Position D/5 D/3,5 D/4

                                  Cutting Parameters


                                  Gun drills operate at relatively high cutting speeds with low feeds per revolution. Approximate starting values are shown in the charts on this page.


                                  View PDF
                                  Diagram
                                  Feed rates are critical to chip formation. The values shown here may need to be adjusted for optimum results.


                                  Diagram
                                  Reliable chip evacuation and good surface finish can only be ensured if sufficient coolant volume and pressure are available.

                                  Pressure and volume vary according to length/diameter ratio.


                                  Diagram
                                  Chart shows maximum unsupported flute length


                                  Diagram

                                                                  news

                                                                  Finance

                                                                  the weather

                                                                  game

                                                                  culture

                                                                  aviation

                                                                  Real estate

                                                                  Mobile Games

                                                                  reading